SENA Promi-MSP User Guide - Manual (Page 19)

19
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Configurable ranges:
Baudrate 1200 ~ 115200 bps
Character size 8, 7, 6, 5 bits
Parity Check None / Even / Odd
Stop Bit 1 bit or 2 bits
Flow Control
Hardware (RTS/CTS),
Software (XOn/Off),
None
If you enable AT command interface, AT commands which are compatible with Promi-SD can be
used with Promi-MSP. Please refer to Promi-MSP AT command list in chapter 6.
For applying changed configuration, please RESUPPLY the power, then Promi-MSP will start to
operate as RS232 mode.
TIP:
If you need to do data communication via RS232 port, you do not need to
configure Network settings.