SENA Promi-MSP User Guide - Manual (Page 52)

52
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
802.11b Wi-Fi devices work.
Specify channel 0(zero) to disable combo mode.
When enabled, overall throughput will be reduced.
Ex.: AFH 10 11
+OK
AFH
+OK AFH 10 11
AFH 0
+OK
5.8 Commands for Bluetooth Connection Management
LIST
: To see connected Bluetooth device list.
Higher link quality, better link status. Zero rssi means the most efficient RF
condition (so called ‘Golden Range’).
With link quality lower than 200, throughput may be affected or link may be
lost.
Response: idx|dev_id|port|bdaddr|name|tx_byte|rx_byte|link_quality|rssi
Ex.: LIST
0|0|5000|00:0B:53:00:00:8A|SDv3b-00008A|0|0|255|0
+OK
CONN <bdaddr> [channel]
: Promi-MSP may try to CONNECT to Bluetooth devices. If you specify a
channel, Promi-MSP will try connection directly skipping SDP (Service
Discovery Protocol) process.
Each device to connect should be in connectable mode.
Ex.:
CONN 00:0B:53:00:00:8A
+OK