SENA Promi-MSP User Guide - Manual (Page 28)

28
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
In Repeater Mode, Promi-MSP will act as a Repeater to expand the coverage of
existing Promi-MSP. Let’s call the Promi-MSP which will act as Repeater, “Repeater”,
and call the Promi-MSP of normal operation as “Station”.
In Repeater Mode, the Bluetooth address of the Station is all you need to configure.
When Repeater is trying to connect to the Station, Status LED of Repeater is blinking.
Repeater and Bluetooth devices connected to the repeater are displayed in ‘Repeater’
tab in software.
e) Serial Hub Mode
Users may transmit/receive data via Promi-MSP in Serial Hub mode (Serial Hub).
Promi-MSP in serial hub mode relay the data from a Bluetooth device to another
Bluetooth device connected to Promi-MSP. No network host is involved.
Users may configure Promi-MSP how to handle data from Bluetooth devices in
advanced configuration of Promi-MSP software.
Note:
When using repeater, overall data throughput can be lowered.
Multi-level repeater is not allowed.