SENA Promi-MSP User Guide User Manual
Page 69
Advertising
69
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Fig. 9.2. Installation of Serial/IP
After installing Serial/IP, you can find Serial/IP tray icon. Right mouse clicking the Serial/IP icon
on the right side of the Windows Tray activates “Configure… ,” “Trace Window… ,” and “Port
Monitor...” menu display.
Fig. 9.3. Windows Tray after installation of Serial/IP
Click “Configure… ” menu, and select the COM port to redirect to Serial/IP as in the left picture in
Fig. 9.3 below.
Enter IP address and Port number to meet Promi-MSP configuration as in the
right picture in Fig. 9.3.
Advertising