SENA Promi-MSP User Guide - Manual (Page 38)

38
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Default data port number in Vertex mode is 3000. If you need to use other port number, please
change the configuration using Promi-MSP software->Advanced configuration.
4.4 Repeater Mode
Promi-MSP in Repeater Mode can be used to function as a Repeater to extend the range of
Bluetooth network or avoid obstacles between Promi-MSP and Bluetooth devices. Please refer
to the drawing below.
Multiple Repeater Promi-MSPs up to 7 can be connected to one Station Promi-MSP, but
Repeater-to-Repeater connection (Multi-level repeater) is not allowed. Promi-MSP may operate
as “Station MSP” while it is either Server/Client/Vertex/Serial Hub/RS232 mode.
All you need to configure in Repeater is only Bluetooth device address of Station MSP and
repeater doesn’t need to have any network connectivity (Just power-supply).
Note:
When using repeater, overall data throughput can be lowered.
Multi-level repeater is not allowed.
Station MSP
Repeater
MSP