2 client mode, 3 vertex mode – SENA Promi-MSP User Guide User Manual
Page 37
37
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
4.2 Client Mode
In a Client mode, Promi-MSP
™ will act as a “TCP client”.
When a Bluetooth device connects to Promi -MSP, Promi-MSP will send TCP connection request
to the designated Host. Once TCP connection is established, Bluetooth devices and a Host may
communicate via Promi-MSP, same as in Server mode.
Only difference from Server mode is that the initiator is now Promi-MSP. Please refer to the
drawing below for your better understanding.
Fig. 4.2 Client Mode
4.3 Vertex Mode
Vertex Mode is similar to Server Mode. Only difference is that, in Vertex Mode, data from a Host
are sent to all of connected Bluetooth devices, like Multi-drop. This mode can be a replacement
of RS485/RS422 multi-drop.
Fig. 1.3.1 Vertex Mode
Bluetooth Terminals
Bluetooth Terminals