SENA Promi-MSP User Guide - Manual (Page 36)

36
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
4. Operation Mode
With Promi-MSP ™ , users may configure the mode of operation to meet each application.
Total 6 kinds of different modes can be selected. By selecting the appropriate mode, users may
minimize cost and time for developing new solution.
4.1 Server Mode
In Server Mode, Promi-MSP will act as TCP server. If a Bluetooth device is connected to Promi-
MSP, corresponding TCP port for the Bluetooth device will wait for connection for as Host. The
Host may connect to the terminal via this port of Promi-MSP.
Please refer to the drawing below for your better understanding.
<Fig. 4.1> Server Mode
If a Bluetooth device has been registered to Promi-MSP, the Bluetooth device will communicate
with client host via the designated port at Promi-MSP.
If not registered, Promi-MSP will assign arbitrary port number to connect.
Pre-registered Bluetooth devices are distinguishable by the different port numbers at Promi-
MSP.
Bluetooth Terminals