SENA Promi-MSP User Guide User Manual
Page 58
58
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Promi-MSP responds with CONNECT.
AT+BTSCAN
Scan mode can be specified.
1: Discoverable
2: Connectable
3: Discoverable and Connectable
at+btscan,3<cr>
AT+BTINQ?
compatible with Promi-SD
AT+BTINFO?
〃
AT+BTNAME
〃
AT+BTKEY
〃
AT+UARTCONFIG
〃
AT+BTCANCEL
〃
AT+SETESC
〃
AT+BTLAST?
〃
AT+BTSEC
〃
AT+BTSD?
〃
AT+BTCSD
〃
AT+BTMODE
Support only Mode 1 and Mode 2.
You can register Mode 1 devices by using
AT+BTREG.
S
※ -registers are not supported.
Following commands are appended to Promi-MSP.
Command
Description
Example
AT+BTCHAN?
Show currently selected device.
Promi-MSP
only
communicates
with
selected device.
AT+BTCHAN?
000B53123456
OK
AT+BTCONN?
Show all connected devices.
AT+BTCONN?
000B53123456,PSDv3b-123456
000B53112233,PSDv3b-112233
OK
AT+BTREG
Register Mode 1 device.
In Mode 1, all connections with registered
devices will be recovered after power-up.
AT+BTREG,000b53123456