GE Industrial Solutions AF-600 FP OPCMBTCP Modbus TCP Option User Manual
Page 18
4.1.3 Configuring the Scanner
For configuring the scanner to communicate to the drive, no system (e.g. EDS, GSD file) file is needed. The AF-600 FP/AF-650 GP is handled as a generic device an
as such, it has to be configured directly in the scanner. The following example setup the scanner to IP addresses 192.168.1.20 and the AF-650 GP to address
192.168.1.20.
Configuring a Modicon scanner.
The following example uses the Unity Pro tool from Group Schneider to configure the PLC. The example only shows the setting up of the Protocol and assigning
I/O mapping to internal memory of the PLC.
Under network, add a network by right clicking the Network menu and select “New Network”
By selecting this menu you will be asked to assign a name to the new network. In this example “AF-600” has been choosen.
Modbus TCP
17
4