In par. o-50 coasting select, Modbus tcp – GE Industrial Solutions AF-600 FP OPCMBTCP Modbus TCP Option User Manual
Page 36
O-10 Control Word Profile
Select the interpretation of the control and status words corresponding to the installed network. Only the selections valid for the network installed in slot A will
be visible in the Keypad display.
For guidelines in selection of GE Drive profile [0] please refer to the Serial communication via RS 485 Interface section.
Option:
Function:
[0] *
Drive Profile
O-13 Configurable Status Word STW
Option:
Function:
This parameter enables configuration of bits 12 – 15 in the status word.
[0]
No function
[1] *
Profile Default
Function corresponds to the profile default selected in par. O-10 Control Word Profile.
[2]
Alarm 68 Only
Only set in case of an Alarm 68.
[3]
Trip excl Alarm 68
Set in case of a trip, except if the trip is executed by an Alarm 68.
[16]
T37 DI status
The bit indicates the status of terminal 37.
“1” indicates T37 is high (normal)
only available in AF-650 GP.
O-14 Configurable Control Word CTW
Option:
Function:
Selection of control word bit 10 if it is active low or active high
[0]
None
[1] *
Profile default
[2]
CTW Valid, active low
O-50 Coasting Select
Option:
Function:
Select control of the coasting function via the terminals (digital input) and/or via the network.
[0]
Digit Input
Activates command via a digital input.
[1]
Bus
Activates command via the serial communication port or network option module.
[2]
Logic AND
Activates command via the network/serial communication port, AND additionally via one of the digital
inputs.
[3] *
Logic OR
Activates command via the network/serial communication port OR via one of the digital inputs.
NB!
This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.
O-51 Quick Stop Select
Select control of the Quick Stop function via the terminals (digital input) and/or via the network.
Option:
Function:
[0]
Digital Input
[1]
Bus
[2]
Logic AND
[3] *
Logic OR
NB!
This parameter is active only when par. O-01 Control Site is set to [0] Digital and control word.
Modbus TCP
35
6