GE Industrial Solutions AF-600 FP OPCMBTCP Modbus TCP Option - Manual (Page 43)

EN-94 Broadcast Storm Protection
Option: Function:
The built-in switch is capable of protecting the switch system from receiving too many broadcast pack-
ages, which can use up network resources. The value indicates a percentage of the total bandwidth that
is allowed for broadcast messages.
Example:
The “OFF” means that the filter is disabled –all broadcast messages will be passed through. The value
“0%” means that no broadcast messages will be passed through. A value of “10%” means that 10% of
the total bandwidth is allowed for broadcast messages, if the amount of broadcast messages increases
above the 10% threshold, they will be blocked.
[0] Protection Value Port 1 (*Off – 20%)
[1] Protection Value Port 2 (*Off – 20%)
EN-95 Broadcast Storm Filter
Option: Function:
Applies to par. EN-94; if the Broadcast Storm Protection should also include Multicast messages.
[0] Broadcast only
[1] Broadcast & Multicast
EN-98 Interface Counters
Option: Function:
Read only. Advanced Interface counters, from build-in switch, can be used for low-level trouble-shooting,
The parameter shows a sum of port 1 + port 2.
[0] In Octets
[1] In Unicast Packets
[2] In Non-Unicast Packets
[3] In Discards
[4] In Errors
[5] In Unknown Protocols
[6] Out Octets
[7] Out Unicast Packets
[8] Out Non-Unicast Packets
[9] Out Discards
[10] Out Errors
Modbus TCP
42
6