GE Industrial Solutions LP 33U Series 10 & 20 kVA Installation Guide - Manual (Page 11)

Modifications reserved Page 11/40
OPM_LPS_3UI_10K_20K_1US_V010.doc Installation Guide LP 33U Series 10 & 20 kVA / S1
3 INSTALLATION
3.1 TRANSPORT
The UPS is fixed on transport socket suitable for forklift, which includes a special layer of Ethafoam to
protect the equipment against the transport shock.
Normally the UPS is packaged with carton box.
On request the equipment can be packaged in wooden case.
Move the UPS in its original package to the final destination room.
NOTE !
When moving the UPS, pay attention to:
FRAGILE
SENSITIVE
TO DAMPNESS TO HEAT
SENSITIVE
TO FROST
SENSITIVE
Forklift
The UPS may be lifted with a forklift in upright
position from right and left side.
Take note of the center of gravity marked on
the package.
NOTE !
Check for sufficient floor and elevator
loading capacity.
Transport UPS only in upright position.
Do not stack other package on top of the
UPS.
Forklift
Crane
Fig. 3.1-1 LP 33U Series lifting
Crane
If the UPS has to be lifted by crane, use
suitable carrying belts taking note of the
center of gravity marked on the package.
Take all necessary precautions to avoid
damage to the cabinet while hoisting the
UPS
WARNING !
When loading / downloading and when
moving the UPS, it is forbidden:
When loading / downloading and when
moving the UPS, pay attention to: