Installation when installing this product, Selecting location – Comfort Stat CDT901 User Manual

Page 15

Advertising
background image

CDT900 Series Touchscreen Programmable Thermostata

INSTALLATION

When Installing this Product...

1.Read these instructions carefully. Failure to follow the instructions can damage the product
or cause a hazardous condition.
2.Check the ratings given in the instructions to make sure the product is suitable for your
application.
3.Installer must be a trained, experienced service technician.
4.After completing installation, use these instructions to check out the product operation.

Selecting Location

Install the thermostat about 5 ft. (1.5m) above the floor in an area with good air circulation at
average temperature. See Fig. 5.

Do not install the thermostat where it can be affected by:
----Drafts or dead spots behind doors and in corners.
----Hot or cold air from ducts.
----Radiant heat from sun or appliances. Concealed pipes and chimneys.
----Unheated (uncooled) areas such as an outside wall behind the thermostat.

14

Advertising
This manual is related to the following products: