Burkert Type 8035 - Manual (Page 14)

14
Installation
Type 8025/8035 /
Warning
risk of injury if the fluid pressure/ temperature dependency
is not respected.
• Take account of fluid temperature-pressure dependancy
according to the nature of the materials the fitting is made of
(see the technical data and the operating instructions of the
fitting used).
• Comply with the Pressure Directive 97/23/EC.
protect this device against electromagnetic inter-
ference, ultraviolet rays and, when installed outdoors,
the effects of the climatic conditions.
7.2. installation of a compact version
7.2.1. instructions for installing a compact
version onto the pipe
The 8025 flowmeter has to be inserted into an S020 fitting mounted
on a pipe.
The 8035 flowmeter has to be installed on the pipe using the S030
sensor-fitting.
→
Choose an S020 or S030 fitting appropriate to the velocity of
the fluid inside the pipe: refer to the graphs below:
English