Burkert Type 8035 - Manual (Page 6)

6
General information
Type 8025/8035 /
4. GenerAl informATion
4.1. manufacturer's address and
international contacts
To contact the manufacturer of the device, use following address:
Bürkert SAS
Rue du Giessen
BP 21
F-67220 TRIEMBACH-AU-VAL
You may also contact your local Bürkert sales office.
The addresses of our international sales offices are available on the
internet at:
www.burkert.com
4.2. Warranty conditions
The condition governing the legal warranty is the conforming use of
the device type 8025/8035 in observance of the operating condi-
tions specified in this manual.
4.3. information on the internet
You can find the operating instructions and technical data sheets
regarding the type 8025 or the type 8035 or at:
www.burkert.com.
5. DescripTion of The nAme
plATe
FLOW SE35/8035 HALL SUPPLY: 12-36V ... 70 mA
Output: 1x4-20mA IP65
2xRel: 30V and 42V peak or 60V ... max.
S/N 11 026
00552726 W44MG
M
ade in Franc
e
1 2
6 7 9 10
4
8
3
5
1. Measured quantity and type of the device
2. Type of sensor
3. Characteristics of the current output
4. Power supply and maximum of current consumption
5. Protection class of the device
6. Manufacturing code
7. Conformity logo
8. Specification of the relay outputs
9. Serial number
10. Order code
Fig. 1: Name plate of the 8025 / 8035 flowmeter
English