Burkert Type 8035 - Manual (Page 31)

31
Wiring
Type 8025/8035 /
Wiring of the current output in sourcing mode
Source/Sink selector
(see chap. "8.3.2")
Power supply
4-20mA input at
external instrument
Supply 12..36Vdc
FLOW SENSOR
COIL NPN
SOURCE SINK L+ L- PE P- P+ NC
L+ L- PE P- P+ Iout
PULSE OUTPUT
Without
With Relays
Iout
300 mA
+
-
12-36 V DC
+
-
(*)
PE
Supply 12..36Vdc
FLOW SENSOR
COIL NPN
SOURCE SINK L+ L- PE P- P+ NC
L+ L- PE P- P+ Iout
PULSE OUTPUT
Without
With Relays
Iout
300 mA
+
-
12-36 V DC
+
-
(*)
PE
Wiring of the current output in sinking mode
Power supply
4-20mA input at
external instrument
Source/Sink selector
(see chap. "8.3.2")
(*) If direct earthing is not possible, insert a 100 nF / 50 V condensator between the negative terminal of the voltage supply and the earth.
If the current output is wired, remove the jumper wire between the terminals Iout and L-.
Fig. 27: Wiring, in sourcing or sinking mode, the current output of a compact version, 12-36 V DC, with relays, with cable glands
English