CONTREX M-Traverse - Manual (Page 110)

3 - 63
SERIAL COMMUNICATIONS
The M–Traverse can interface with a host computer through a RS422 Serial
Communications Interface. This interface allows the host computer to perform remote
Control Parameter entry, status or performance monitoring, and remote control of the
M-Traverse. Refer to
“Using Serial Communications” in this section.
If you are using the M-Host software, your communications network is user ready and
does not require any software programming. If you are designing your own software,
refer to
“Communications Software Design” in this section. Once the software is
installed, you are ready to establish a link through the Serial Communications Interface.