Characters 5,6 - parameter number, Characters 7 through 12 - data, Characters 13,14- data – CONTREX M-Traverse User Manual
Page 119: Character 15 - data format, Character 16 - etx
Advertising
3 - 72
Characters 5,6 - Parameter Number:
These characters should always be “0”.
Characters 7 through 12 - DATA:
These characters should always be “0”.
Characters 13,14- DATA:
01
F-Stop
02
Not in Use
03
Run
04
Home Return
05
Home Seek
06
Home Set
07
Batch Reset
08
Setpoint Select 1
09
Setpoint Select 2
10
Setpoint Select 3
11
Setpoint Select 4
12
Not in Use
13
Not in Use
14
Not in Use
15
Not in Use
Character 15 - Data Format:
This character should always be “0”.
Character 16 - ETX:
Always use the ASCII “ETX” character to terminate the character string.
Advertising