Luminex IS Version 2.3 - Manual (Page 15)

x
MAP Technology Luminex 2.3 Software
PN 89-00002-00-110 Rev. B 5
Favorites. You can use the Favorites list to create a customized list
of often-used commands and templates. Items appear in alphabetical
order for easy locating. For more information on setting up the
Favorites list, see page 39.
Button Groups. Button groups are grouped according to function.
• The Daily Startup group contains the Warmup, Prime,
Alcohol Flush, and Wash Commands. For more information
on daily startup, see page 40. For more information on the
commands, see the Commands section on page 28.
• The Instrument Calibration group contains the CAL1,
CAL2, CON1, and CON2 buttons. For more information on
calibrating the system, see page 42. For more information
about these commands, see the Commands section on page 28.
• The Batch Setup group contains the New Batch, New
Multibatch, and New Lot buttons. For more information on
creating and running batches and multibatches, see page 48.
For more information about these commands, see the
Commands section on page 28.
• The Reports and Analysis group contains the Analysis and
Print buttons. For more information on running reports and
analyses, see page 82. For more information about the
Analyses and Print commands, see the Commands section on
page 28.
• The Daily Shutdown group contains command buttons that
you can use when shutting down the system. For more
information on performing a daily shutdown, see page 91. For
more information on the Sanitize and Soak commands, see the
Commands section starting on page 28.
Run Batch Tab The Run Batch tab contains a microtiter plate and reservoir image,
XYP and DD temperature readbacks, a sheath pressure gauge, print
button, command list displaying batch commands and their status,
and plate and XYP command buttons. See Figure 4.