Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 119)

53MT6000 INSTRUCTION MANUAL
Database Editor 103
7.4.16.8 Printer Parameter Configuration
When configured to the printer interface mode, the DDI ports can output serial data under
control of the resident standard format data-log program or user generated free format
data-log program. The printer interface is a unidirectional communications channel. As
such, a device connected to the printer interface must be capable of operating at one of the
baud rates and set-up values without requiring data-flow control.
Figure 7-34. Printer Parameter Configuration Window
ENTRY EXPLANATION
Mode: This displayed value represents the index number of the PLC/printer
type selected. [DDIA = B290, DDIB = B456]
Baud Rate: This designates the data transfer rate. Clicking on the "down arrow"
reveals a list of 11 selections; these are [DDIA = B292,
DDIB = B458]:
110
300
600
1200
2400
4800
9600
19200
14400
28800
38400
Set UP: This designates the data format transfer protocol. Clicking on the
"down arrow" reveals a list of three selections; these are [DDIA =
B293, DDIB = B459]:
8, 1, NO
8, 1, EVEN
8, 1, ODD
7, 1, EVEN
7, 1, ODD
7, 2, NO