Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 98)

53MT6000 INSTRUCTION MANUAL
82 Database Editor
7.4.16.2 OPTO 22 Parameter Configuration
Once the preferred PLC device has been selected, a separate configuration window specific to the inter-
face is displayed, as shown in
Figure 7-28 :
Figure 7-28. Opto 22 Parameter Configuration Window
ENTRY EXPLANATION
Mode: This displayed value represents the index number of the PLC type
[DDIA = B290, DDIB = B456].
Baud Rate: This designates the data transfer rate. Clicking on the "down arrow"
reveals a list of 11 selections, these are [DDIA = B292, DDIB =
B458]:
110
300
600
1200
2400
4800
9600
19200
14400
28800
38400