Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 50)

53MT6000 INSTRUCTION MANUAL
34 Micro-Tools Project Manager
6.4 Importing and Exporting Project Configuration Data
6.4.1 Importing
Several methods are provided to allow importing F-TRAN projects created using the 53HC3300 Custom
Program Interface Software.
6.4.1.1 Importing F-TRAN Project Files
An existing F-TRAN project can be imported automatically by right-clicking on the F-TRAN folder of the
desired controller. Choose Import from the pop-up menu. From the file selection dialog that appears,
select the existing .P5S file that describes the project to be imported (Imports using this method require
that the paths defined in the .P5S file be correct).
6.4.1.2 Importing Individual Control, Display and Subroutine F-TRAN Files
Existing F-TRAN source files can be imported by right-clicking on the Control, Display or Subroutine folder
in the F-TRAN folder of the desired controller. Select Import from the menu. Choose the desired file from
the file selection dialog.
Figure 6-11. Importing F-TRAN Project Files
Figure 6-12. Importing Individual F-Tran Source Files