Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 30)

53MT6000 INSTRUCTION MANUAL
14 Installation
3.4 Installing the Micro-Tools Software
Now the process of installing the Micro-Tools software can begin.
3.4.1 Pre-Setup Procedure
• Check that the Micro-Tools hardware security key is connected to the parallel port of the
computer.
• Have the software license key(s) ready.
• Power on the base PC and boot the Windows Workstation software.
• Log on to the Windows Workstation software with administrative privileges. You must have
administrative privileges or the installations process will not complete successfully.
• Close all Windows applications that are open, (such as Microsoft Word, Excel, Mail,
Scheduler, etc.).
3.4.2 Beginning Micro-DCI Master Setup
• Insert the Micro-DCI CD into the CD-ROM drive.
• If the CD-ROM drive is configured for automatic startup, the Micro-DCI Master Setup window
should open automatically. If the CD does not start automatically, click on the Windows START
button and select Run from the menu. Click the Browse button and navigate to the CD-ROM
drive and the setup.exe file. Once the path to the setup.exe file has been selected, click OK to
open the Micro-DCI Master Setup window.
• In the Micro-DCI Master Setup window, click on the Micro-Tools Setup button to begin the
Micro-Tools installation procedure and start the InstallShield Wizard.
3.4.3 Beginning Micro-Tools Installation
• When the InstallShield Wizard is loaded, the Micro-Tools System Setup window appears.
• Click Next to begin installing Micro-Tools.
If the Micro-DCI Communications Services are being installed for the first time, the setup routine
will prompt for them to be installed. Click on the "OK" button and prompts will appear for
Section
3.4.4 through Section 3.4.9 . Otherwise these items will be skipped and the installation process will
proceed to Section 3.4.10 .
3.4.4 Micro-DCI Communications Services Setup
• The Micro-DCI Communications Services Setup window appears. Click on the Next button to
proceed.