Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 85)

53MT6000 INSTRUCTION MANUAL
Database Editor 69
7.4.11 TREND Menu
Eight TREND modules are available in a Modular Controller. The window for each
TREND module (
Figure 7-20 ) contains the entries listed below.
Figure 7-20. Trend Configuration Window
ENTRY EXPLANATION
Module: Selects the Module to be configured. Use the up or down arrow
buttons to cycle through the control module selection.
Tagname: Tagname of the TREND MODULE.
Trend Engineering Unit: Standard Engineering Units.
Trend Point Designator: Database location of the point to be trended.
Trend Rate (sec): Sample rate, in seconds. Available selections:
1
2
3
4
5
6
10
12
15
20
30
60
Trend Mode: This database parameter is used to select the mode of the process
variable trend. Available selections [B337]:
Instantaneous - instantaneous sample
Average - of 1 second samples
Maximum - of 1 second samples
Minimum - of 1 second samples