Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 126)

53MT6000 INSTRUCTION MANUAL
110 F-TRAN Programming
8.7.1 How to Initiate the Image Build
Click on the F-TRAN Image Builder button in the Project Toolbar (or right-click the F-TRAN image
object with the mouse and select Build from the menu that appears) to open the window used to select the
53MC5000 for which the F-TRAN image will be built. Once you have selected the target controller, the
window shown in
Figure 8-4 will open.
Once you are satisfied with the parts list, use the BUILD button to begin the process of creating a down-
loadable file for the target controller.
Figure 8-3. Diagram of Image File Building Process
Figure 8-4. F-TRAN Image Parts List