Micromod Micro-DCI: 53MT6000 Micro-Tools - Manual (Page 22)

53MT6000 INSTRUCTION MANUAL
6 Installation
on this icon. The screen should appear as shown in Figure 3-1 .
• From the drop-down menu that appears, select the Properties item. The System Properties
window will appear as shown in
Figure 3-2 .
If the General tab is not selected, select it. The operating system version appears as shown in Figure 3-2 .
Verify that Windows 2000 Professional, or Windows XP Professional is installed.
3.3 Hardware Installation
3.3.1 Installing the Hardware Key
A Hardware Key is supplied when one of the standalone versions of Micro-Tools is specified in the model
number (refer to
Section 1.3 ).
The Micro-Tools software is licensed by MicroMod Automation Inc. The license is protected by a hardware
key (see
Figure 3-3 ), which must be attached to the PC's parallel port. The hardware key does not interfere
with the operation of the parallel port. When installed, the hardware key provides a female connector allow-
Figure 3-1. My Computer Icon and Menu
Figure 3-2. System Properties Window