2 ano menu, Figure 7-5. ano parameter window – Micromod Micro-DCI: 53MT6000 Micro-Tools User Manual
Page 62
53MT6000 INSTRUCTION MANUAL
46 Database Editor
7.4.2 ANO Menu
The number of analog outputs per controller is dependent on the options purchased with the controller.
MicroTools provides access for all four possible analog output modules (AO0 through AO4). The window
for each AO module contains the entries listed below..
In the unlikely event that the calibration span and zero must be changed, see
tion of adjusting calibration constants using the CALIBRATION menu.
ENTRY
EXPLANATION
Channel:
Displays channel number
Tagname:
Tagname
Output:
Selects between 4 - 20 or 0 - 20 mA output range
OK:
Saves changes, closes window and returns to main menu
Save:
Saves changes without closing window
Cancel:
Cancels changes and returns to main menu
Figure 7-5. ANO Parameter Window