Multichannel Systems HiClamp Manual - Manual (Page 34)

HiClamp Manual
28
If you turn on the data acquisition by checking the box "Acquisition", the second icon will change
it´s appearance and "A/D" will be displayed instead of “W”.
If you click the button "Voltage Command" the respective dialog opens which allows you
to define voltage protocols in step and ramp mode.
Pushing the button Play will start HiClamp. The button “Play” will be replaced by Stop as soon as
the sequence is activated. Hitting the Stop button will stop the procedure. Importantly, however,
time should be allowed to complete the entire stop procedure before interacting with
the automate.
The window DataPlot will automatically pop out upon capture of your first data set. All data
are automatically stored on the hard disk in defined files (see file organization).
Before we get into more sophisticated protocol sequences, you should learn about the meaning
of all icons and the functions behind them.