SecurityMan Air-AlArmII series - User manual - Manual (Page 13)

9
Wireless remote Controllers (sM-88X)
Functions/Features:
• Used to arm and disarm alarm host.
• Emergency button for emergency or panic help.
specifications:
• Operating power: 27A 12V Battery (Recommend: alkaline battery)
• Wireless Transmitting distance: ≥300ft (in open area)
• Service life: ≤2 years
Installation and Usage:
Makes arming and disarming the alarm host fast and easy. The “AWAY” button is normally used whenever you leave your
home or business. This feature insures that any perimeter breach and or motion detection will set off the alarm. The
“HOME” button is normally used at night. This feature only responds to a perimeter breach and does not set the alarm if
any of the motion sensors are triggered as you walk throughout the house. Please replace the battery every 2 years or
anytime when the remote controls becomes less sensitive or has shorter control distance.
Adding and Cancelling remote Controllers:
To Add:
Step 1: Press
PrGM + Password + enT+ 70 + enT+ 00 + enT the “ ” light will appear solid blue.
Step 2: Press any button on remote controller twice consecutively, the alarm host will beep in series and the “ ” light
flash 5 times and then turn off to indicate the remote control has been successfully added.