SecurityMan Air-AlArmII series - User manual - Manual (Page 24)

* Please use screw (G) to mount. (see page26)
20
Wireless Outdoor siren (sM-103, optional)
Functions/Features:
• Nice, exquisite, and weatherproof.
• Micro-computer controller, steady performance and quality.
• Study up to 10 pieces to a host.
• Built-in rechargeable battery for backup, automatic switches between AC powers to DC power in cases of emergency outage.
• Low standby power consumption, low battery voltage LED detection, resumes charging automatically.
• Wall mount installation
specifications:
• Operating power: 110~240VAC_50Hz
• Static power consumption: ≤40 mA
• Working power consumption: ≤450 mA
• The maximum alarm sound duration with flash: 3 Minutes
• Receiving distance: ≥300ft (in open area)
• Built-in Rechargeable battery 6VDC 1300mA (up to 100 hours stand-by)
• Alarm Siren Sound ≥120dB
• IP51
Installation and usage:
Plug the AC cord into to an electrical power outlet and leave it plugged in to charge the internal rechargeable battery
for several hours (20 hrs to fully charge). Next, press the green button to enable the backup battery located on the
back side of the outdoor siren. Study the siren to the alarm host according to “To Activate:” instructions below.
Unplug the siren from the electrical outlet after finish pairing to the alarm host and then find a proper location