SecurityMan Air-AlArmII series - User manual - Manual (Page 16)

12
Disabling Smart Arm:
Press
PrGM + Password + enT + 90 + enT
**Implies to zones 06 through 10 only.
**Detect the door/window OPEN status alert when attempting to ARM.
Another feature that is equipped with the Smart door/window sensor is the Zone Alert feature. The Zone Alert if ON
(System Default) send the signal to the alarm host to beep in series to notify the door/window open status and close status.
If the door is open the alarm host panel will beep 5 times and then when the door is close, the alarm host will beep 2 times.
Here are some of the scenario characteristics behavior of the Zone Alert features in ARM mode and in DISARM mode:
1) When Alarm Host Is In Disarm Mode:
A) Door is open, the alarm host will beep 5 times and the zone LED light will flash 5 times to indicate the door/window
is opened.
B) Door is open and then close after 5 seconds later, the alarm host will beep 5 times and the zone LED light will flash 5
times to indicate the door/window is opened and 2 times when the door/window is closed.
C) Door is open and then close within 2-second, the alarm host will beep 5 times and the zone LED light will flash 5
times to indicate the door/window has been opened for a short (2-second) period of time and the door/window is in
a close status.
D) Door is open and then immediately close after 2-second, the alarm host will beep 7 times and the zone LED light will
flash 7 times to indicate the door/window has been opened and closed immediately after 2-second.
2) When Alarm Host Is In Arm Mode:
A) Door is open within the Delay Time to Exit (default to 40 seconds), the alarm host will beep 5 times and will not
trigger the alarm within this time.
B) Door is open after the Delay Time to Exit (default to 40 seconds), the alarm host will trigger the alarm and all the
siren will sound normally.
IMPOrTAnT: Please keep all doors/windows close during the Delay Time to exit to avoid system malfunctioning. If
the smart Arm function is not enabled, the smart Door/Window sensor will work as a general door/window sensor
suitable for Air-Alarm series.
Zone Alert On/OFF (sM-87l and host sM-8088T)
Zone Alert ON (Default):
Press
PrGM + Password + enT + 92 + enT + XX + enT [XX means input zone 06~10]
Zone Alert OFF:
Press
PrGM + Password + enT + 93+ enT + XX + enT [XX means input zone 06~10]
**Zone Alert can be turn ON or OFF in any specific zones from 06 through 10.
**In alarm disarm mode, Zone Alert ON will allow the alarm host to beep 5 times when the door/window is open and
beep 2 times when the door/window is close.