Wireless panic button (sm-89, optional) – SecurityMan Air-AlArmII series - User manual User Manual

Page 25

Advertising
background image

*

To mount, please remove the back cover

and use screw (H). (see page 26)

21

(Outdoor/indoor) to secure the outdoor siren with the mounting screw provided and finally plug in the power cord to an
electrical power outlet.

After pairing the siren to the alarm host and securing it to a fixed location, the siren is ready to received alarming signal
from the Air-Alarm host. This siren is rated at 120dB, an ear piercing loud sound that could be heard blocks away. When the
siren triggered, the alarm will siren off at 120dB and at the same time the red LED light on the siren will flash to alert the
premise of intrusion. Disable the alarm host by pressing on the Disarm button on the remote control or by pressing on ESC
+ Password + ENT and the siren will turn off. The alarm sound will lasts up to 3 minutes if the alarm host is not disarmed
after the 3 minutes. When the backup battery has a voltage that is equal to or less than 5VDC, the charging indicator (solid
red) light will light up to represent charging. The internal rechargeable battery takes approximately 20 hours to charge.

Activating and Deactivating Outdoor siren:

To Activate:

Step 1: Connect the siren to an electrical power outlet.
Step 2: Press the red Study button located on the back of the siren (the red siren lights will turn ON).

Step 3: Press “

” emergency button on the alarm host to sound off the alarm for 12 seconds.

Step 4: Disarm the alarm by pressing

esC/Disarm + programming password + enT, the alarm host will beep twice to

indicate the outdoor siren has been successfully disarmed. The light on the siren will then flash 5 times to
indicate the outdoor siren has been successfully added. When disarming the alarm, DO NOT use the remote
controls to disarm in the “To Activate:” process.

note: One siren can be study at a time, up to 10 wireless alarm sirens to a host.

To Deactivate:
Press and hold the Study red button for 10 seconds, the siren will flash once to indicate the outdoor siren has been
successfully deactivated.

Wireless Panic button (sM-89, optional)

Advertising