IAI America XSEL-S - Manual (Page 206)

Chapter 6 Operations of X-SEL
PC Software Extension Motion Control Functions
198
Saving Position Data of Extension Motion Control Board Axes
Click the Save As button in the Position data edit (Extension Motion Control Board) window.
This button provides the same function as clicking [File] o [Save As].
Transfer Position Data of Extension Motion Control Board Axes to Controller
Click the [Transfer to Controller] button in the Position data edit (Extension Motion Control Board)
window. (This button is enabled only in online status.)
After transfer to the controller, the flash ROM write confirmation dialog box (Figure 3.14) appears.
Figure 3.14. Flash ROM Write Confirmation
Click to select the check boxes you want to write to the flash ROM (user data-hold memory, etc.).
(extension motion control board axis position data is written to the user data-hold memory.)
Click [Yes]: The memory data is written to the flash ROM.
Click [No]: The memory data is not written to the flash ROM.
The memory data is discarded by resetting (turning the power supply on again or
resetting the software) and data is read the flash ROM.