Installing the batch portable application on the, Handheld device – IntelliTrack Stockroom Inventory User Manual
Page 230
I
NTELLI
T
RACK
S
TOCKROOM
V
8.1
User Manual
202
Or, open the Batch Portable Utility via your DMS application and click
the Hardware Support Matrix link via the Installation tab to go directly
to the Hardware Support Matrix page (requires Internet connection at
your PC.) (The Batch Portable Utility is opened via the ribbon: select
Portable > Synchronize CE Device > Synchronize CE Device from
the ribbon.)
2.
In the Product field, click the drop-down arrow and select your Intelli-
Track Product from the drop-down list that appears.
3.
In the Version field, click the drop-down arrow and select your Intelli-
Track Product Version from the list that appears.
4.
In the Make field, click the drop-down arrow and select your device
manufacturer from the list that appears.
5.
A list of supported devices appears. Look for your device and operating
system. If you are able to locate your device and your device operating
system, click the Download button next to your device manufacturer/
operating system listing in order to download your device installer to
your computer.
If you cannot locate your specific device, select Generic in the Make
field and locate the operating system of your device. Click the Down-
load button next to your device operating system listing in order to
download the generic device installer for this device operating system
to your computer.
6.
A message appears asking you if you want to run or save the file. Click
the option to save the device installation setup file to your computer.
7.
Follow your browser prompts: browse to the folder location to which
you want to save this file and then click the Save button. Remember
this location. Refer to the next section,
“Installing the Batch Portable
Application on the Handheld Device” on page 202
for detailed step-by-
step device installation instructions.
Installing the
Batch
Portable
Application
on the
Handheld
Device
The CE Batch Portable application interface is installed on the handheld
device.
1.
Open the device installer file (retrieved from the Hardware Support
Matrix, see
“Retrieving your Device Installer from the Hardware Support
and double-click on it to open the CE Setup Wiz-
ard.
2.
A security warning appears; select to Run this file.
3.
The Installation Setup Wizard appears, welcoming you to the setup
wizard.
2289.book Page 202 Thursday, July 7, 2011 5:10 PM