IntelliTrack Stockroom Inventory - Manual (Page 263)

Chapter 15
CE Data Transfer
235
loaded data to the Batch Portable Application, please refer to the steps that
follow.
1. From the DMS Batch Synchronization Utility, click the Send Data tab
in the Main form to bring this portion of the form to the front.
Note: To send only the required system data (language options and User
IDs), do not set any options in the Send Data tab.
2. If security is enabled in the system, the Enable Security check box is
available in the Send Data tab of the Main form. In the Send Data to
CE Device portion of the form, mark the Enable Security check box to
activate security in the Batch Portable Application on the handheld
device; user ID and password information (if applicable) will be sent to
the Batch Portable Application.
3. Mark the Send Sites check box to send site information to the handheld
device. The Site List field becomes enabled.
When you elect to send site data, the location, inventory selections are
enabled.
4. Click the drop-down arrow in the Site List field to select All sites or a
specific site to the Batch Portable Application on the handheld device.
Site List field
drop-down
2289.book Page 235 Thursday, July 7, 2011 5:10 PM