Activesync work network connection setting, R to – IntelliTrack Stockroom Inventory User Manual
Page 55
Chapter 2
DMS Batch Installation Setup
27
Please be aware of the system requirement for the Microsoft ActiveSync
version; it can be found in the Quick Start Guide or the product data sheet
found on the IntelliTrack websit
). If the required
Microsoft ActiveSync version is already installed on your computer, skip
ahead to the next section,
“ActiveSync Work Network Connection Setting”
. Otherwise, install the ActiveSync software according to the
instructions that came with your handheld device.
Note: You are able to download the MicroSoft ActiveSync application
from
. Please check the application specifications
found in the Quick Start Guide for supported version information.
ActiveSync Work Network Connection Setting
Before you install the DMS Batch Portable application on the handheld
device, you must have Microsoft ActiveSync installed and configured for
work network communication on the PC where the handheld device(s) will
be connected. In the Microsoft ActiveSync application, click File > Con-
nection Settings. The Connection Settings window appears.
•
In the Connection Settings window, make sure the Open ActiveSync
when my device connects check box is marked.
•
Click the drop-down arrow in the This computer is connected to field
and select Work Network from the list that appears.
2289.book Page 27 Thursday, July 7, 2011 5:10 PM