Staub Electronics WPS-100-DVR-8CH WIREPATH - 8 CHANNEL DVR W_500GB HDD - Manual (Page 13)

13
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
3. INSTALLATION
The installation connections described below should be made by a qualified system installer.
3.1 BASIC CONNECTIONS
Please refer to the following diagram for the connections.
• CAMERAS
Connect the video output from cameras or other composite video sources using coaxial cable to the
Video In connectors. Internal 75Ω termination is always ON.
• MAIN MONITOR/VGA OUTPUT
Connect the Main Monitor output (BNC) to a surveillance TV monitor, or connect the VGA output
to a VGA monitor.
• POWER
Connect the included 12V DC 3.0A power supply to DC 12V.
Amplifier
Speakers
WPS-100-DVR-8ch
Motion Sensor(s)
Siren
LCD Monitor/Flat Panel TV
CRT Monitor
Camera(s)
Microphone
Router
Automation System