Staub Electronics WPS-100-DVR-8CH WIREPATH - 8 CHANNEL DVR W_500GB HDD - Manual (Page 65)

65
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
8.2 SEARCH BY EVENT / LOG DISPLAY
The Search By Event feature allows the user to search for recorded video and audio based on the
type of event recorded by the DVR.
The DVR will store up to 6000 of the most recent event logs. There are four different types of event logs: Alarm,
Motion, Video Loss, and System.
Tip: You can jump to a log page quickly by selecting the page box with the mouse and typing in the desired
page number. This is useful when you need to see the last page of recordings.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item. Alternatively
use the mouse to select an item.
• ENTER
Press the ENTER button on the front panel of the DVR or on the remote control to select the highlighted log.
Alternatively use the mouse to select the corresponding Search menu icon.
• MODE
Press the Mode button to refresh the log display. If there are new event logs since the screen was
displayed, the log list will be updated accordingly. Alternatively use the mouse to select the
Refresh option.
• SEARCH
Press the Search button to Log (export) the event log to a backup device. Alternatively use the
mouse to select the Log option.
• SEQ
Use the SEQ button on the front panel of the DVR or on the remote control to scroll the Event Log
Page Up. Alternatively use the mouse to select the Page Up option.
• CALL
Use the CALL button on the front panel of the DVR or on the remote control to scroll the Event Log
Page Down. Alternatively use the mouse to select the Page Down option.
• Numeric
Press the numeric buttons on the front panel of the DVR or on the remote control followed by the
ENTER button to select the display page of the event logs. Alternatively use the mouse to click
the Page Number box.
• Play (►/II)
Press the PLAY button on the front panel of the DVR or on the remote control to begin playback of the
recorded video and audio using the defined search time and video type. Alternatively use the mouse
to select the PLAY button. If there is not a camera currently in playback mode then all of the cameras
in the current split window will begin playback. See Section 8.5 for more details.
• Copy ( )
Select the COPY button from the front panel of the DVR or on the remote control to backup (copy)