Staub Electronics WPS-100-DVR-8CH WIREPATH - 8 CHANNEL DVR W_500GB HDD - Manual (Page 84)

84
WPS-100-DVR-8CH Installation and Users Manual
“-“ (Default) - No Guest Access Allowed (Does not prevent access by User with login credentials)
Administrator - Provides full access to the DVR allowing for viewing of all cameras and modification to all
settings. Use this setting with caution.
Supervisor - Provides access to view and control all cameras, Search, Archive and modify basic settings.
Operator - Provides access to view and control all cameras. No access to Search or settings is provided.
UserName - Provides customized access to the features defined in the Advanced Settings for a particular user.
See Adv: below for more information.
Note: If an RS-232 or IP control system is being used, the Default setting allows the system to control the DVR, but
prevents Guest access to DVR features. With this setting users would be required to enter a Login and Password
to view cameras, change settings, etc..
• Remote Guest Level
Allows or restricts access to the DVR by Guests accessing the DVR from the Internet Explorer plugin interface
without a dedicated Login. The option selected determines the level of access a Remote Guest will have.
“-“ (Default) - No Guest Access Allowed (Does not prevent access by User with login credentials)
Administrator - Provides full access to the DVR allowing for viewing of all cameras and modification to all
settings. Use this setting with caution.
Supervisor - Provides access to view and control all cameras, Search, Archive and modify basic settings.
Operator - Provides access to view and control all cameras. No access to Search or settings is provided.
UserName - Provides access to the features as defined in the Advanced Settings for a particular user. See Adv:
be low for more information. Note: It is recommended that Remote Guest Level be set to the the
default “-“ to prevent unwanted access to the DVR from outside sources.
• AUTO LOGOUT
If there is no user operation in the time selected from 1 minute to 24 hours, the user will automatically
be logged out.
• LOGIN NAME
Enter a unique name for each user.
• PASSWORD AND CONFIRM PASSWORD
Enter a unique password (numbers only) for each user.
• LEVEL
Select the appropriate access level (Administrator, Supervisor, Operator, or Customized) for each user.
• DEFAULT LOGIN
Check the Default Login box so the corresponding user’s login name and password will be the default
credentials populated in the Login/Logout dialog box so the user doesn’t have to enter text to login
the system. Default Login will be noted with a “V” in the Default Login column.
WARNING – This feature could allow unwarranted access to the DVR. Caution is strongly advised when
enabling this feature. Setting a default login means that the user name and password will automatically
populate the Login/Logout box. This could leave the system vulnerable to unauthorized use. It is
recommended to deselect a default login so users are required to provide credentials to access the DVR.