Staub Electronics WPS-100-DVR-8CH WIREPATH - 8 CHANNEL DVR W_500GB HDD - Manual (Page 58)

58
WPS-100-DVR-8CH Installation and Users Manual
6.10.3 ADVANCED NETWORK SETUP
The Advanced Network Setup allows the administrator to set advanced network parameters use for
connection from remote devices such as PCs and Smart phones. Consultation with the network
administrator may be required for these settings.
In Network Setup, press ENTER to display Advanced Network Setup as shown when the highlighted
option is Adv.
To navigate and operate this menu:
• ▲▼◄►
Press these buttons on the front panel of the DVR or remote control to select an item. Alternatively use
the mouse to select an item.
• ESC
Press the ESC button on the front panel of the DVR or remote control to escape from this menu and
return to the main menu. Alternatively use the mouse to exit the sub menu by clicking on the “X.”
If the contents in this menu have been modified, a Save dialog box will be displayed requesting the
user to save the changes. Press ENTER on the front panel of the DVR or remote control to exit and
save, ESC to exit without saving. Another method to escape is to use the mouse to “right-click,”
and exit the sub menu.
The following is a brief description for each item in this menu and its specific operations:
Please follow the Text Input method described in Section 4.1 to modify these items. Alternatively use the mouse
and the pop-up keyboard to enter these settings. See Appendix F for more information on Router Setup and
how it relates to these settings.
• CONTROL PORT
Enter the Control Port for remote access. The default value is 67.
• DATA PORT
Enter the Data Port for remote access. The default value is 68.
• HTTP PORT
Enter the HTTP (web page) port for remote access. The default value is 80.
• WAP PICTURE QUALITY
WAP (Wireless Application Protocol) is a simple standard for remote devices (such as Smart phones) to
access the DVR. Press +/- buttons on the front panel of the DVR or on the remote control to change the
value the WAP picture quality if WAP access will be required by remote devices. See Section 9.6 for more
information on WAP.
• VIDEO STREAM
Press the +/- buttons on the front panel of the DVR or on the remote to change the video quality sent to
remote devices such as PCs and Smartphones. Alternatively use the mouse to change this setting. If
Record is selected, the DVR will stream video at the same resolution as the Record setting (See Section 6.1).
Dual Streaming allows for remote devices to receive lower resolution at higher speeds to the device
(see Section 9.4). This is especially helpful for remote devices on slower network. Reducing resolution sent
to these devices will speed up the delivery of the video. To enable Dual Streaming, select one of the four
levels of QCIF (Fair is the lowest quality while Superfine is the highest quality). If Dual Streaming is used, the
total system recording rate will be reduced.
Note: To use Dual Streaming in Internet Explorer, the user must select the Extra Video Stream option in the
Modify Menu of the Device List (See Section 9.1).