Staub Electronics WPS-100-DVR-8CH WIREPATH - 8 CHANNEL DVR W_500GB HDD - Manual (Page 55)

55
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
Enter the Gateway IP address for the system.
• DNS
If using DNS, enter the Domain Name Server address for the system.
• USERNAME
If PPPoE is used, enter the Username for the system.
• PASSWORD
If PPPoE is used, enter the Password for the system.
• DDNS TYPE
Press +/- buttons on the front panel of the DVR or on the remote control to select the Dynamic Domain
Name Server type to Dynamic, Static, or Custom DDNS type. Contact the DDNS Service Provider to get
the DDNS type, DDNS URL, username, and password, or refer to Appendix E for details on how to use
the free service from DynDns.
• URL
Enter the DDNS URL if DDNS is used.
• DDNS USERNAME
Enter the DDNS Username if DDNS is used.
• DDNS PASSWORD
Enter the DDNS Password if DDNS is used.
• E-MAIL
Press ENTER on the front panel of the DVR or on the remote to display the E-mail Setup menu.
Alternatively use the mouse to enter this menu. Refer to Section 6.10.1 for details.
• FTP
Press ENTER on the front panel of the DVR or on the remote to display the FTP Setup menu. Alternatively
use the mouse to enter this menu. Refer to Section 6.10.2 for details.
• ADV.
Press ENTER on the front panel of the DVR or on the remote to display the Advanced Network Setup
menu. Alternatively use the mouse to enter this menu. Refer to Section 6.10.3 for details.
6.10.1 E-MAIL SETUP
The E-mail Setup allows the administrator to set e-mail related parameters. When an event occurs and E-mail is
enabled for the corresponding action, an e-mail will be sent based on the parameters set in this menu.
In Network Setup, press ENTER to display E-mail Setup as shown when the highlighted option is E-mail.