Staub Electronics WPS-100-DVR-8CH WIREPATH - 8 CHANNEL DVR W_500GB HDD - Manual (Page 67)

67
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
To navigate and operate this menu:
• MODE
Press the Mode button on the front panel of the DVR or on the remote control to begin searching the
recorded video and audio based on the selected search Time, Camera, and Motion Area. Alternatively
use the mouse to set the parameters and begin the search. The search results will be displayed on the
right half of the dialog box.
Note: To prevent the Smart Search feature from overloading the system, a maximum of up to 500
matched files or 200 GB of hard drive storage for each record partition will be searched based on the
start time entered.
•
SEQ
Use the SEQ button on the front panel of the DVR or on the remote control to scroll the results Page Up.
Alternatively use the mouse to select the Page Up option.
• CALL
Use the CALL button on the front panel of the DVR or on the remote control to scroll the results Page Down.
Alternatively use the mouse to select the Page Down option.
• Numeric
Press the numeric buttons on the front panel of the DVR or on the remote control followed by the ENTER
button to select the display page of the results. Alternatively use the mouse to click the Page Number box.
• Copy ( )
Select the COPY button from the front panel of the DVR or on the remote control to backup (copy)
the selected type of recorded video (beginning from the Search Time) to the connected backup device.
The Backup menu (described in the Archive portion of Section 8.6) will be displayed. Alternatively use the
mouse to select the COPY button.
The following is a brief description for each item in this menu and its specific operations:
• CAMERA ID
Press +/- buttons on the front panel of the DVR or on the remote control to change the camera ID to
be searched for matching files. Altenatively use the mouse to enter the Camera ID number.
• START/END TIME
Press +/- buttons on the front panel of the DVR or on the remote control to modify the beginning and end
of the search time for the recorded video and audio. Enter the appropriate Year, Month, Date, Hour, and
Minute. Alternatively use the mouse to enter these parameters.
• MATCHED FILE LIST
The results of the Smart Search will be displayed in the right side of the dialog box. The files are shown
from oldest to newest and a page number is shown on the lower-left corner of the dialog box.
The user may:
1. Press the ENTER button on the front panel of the DVR or on the remote control to select or deselect
a matching event file in the results list. Multiple events can be selected in this manner. Alternatively
use the mouse to select or deselect each event.