Staub Electronics WPS-100-DVR-8CH WIREPATH - 8 CHANNEL DVR W_500GB HDD User Manual
Page 8
8
WPS-100-DVR-8CH Installation and Users Manual
2.1 REAR PANEL
1. Video Input Connectors (1-8)
Connect cameras to these BNC connectors. Internal 75Ω termination is always ON.
2. Audio Output Connector (AUDIO OUT)
This RCA connector supplies line level audio to an external device, such as an amplifier.
Recorded audio will be output from the AUDIO OUT connector during playback, and live audio
can be monitored during live viewing.
3. Audio Input Connectors (AUDIO IN)
These RCA connectors accept line level audio supplied from external devices, such
as microphones.
4. Main Monitor Output VGA Connector (VGA)
Connect a VGA monitor to the D-SUB 15-pin female connector for main monitor display.
5. Power Connection (DC 12V IN)
Connect the supplied 12VDC 3A power supply.
6. IR Extension Connector (I/R)
The IR connector is used to receive commands from an IR remote control system.
7. Alarm Output Connector (ALARM OUT NC / NO)
Use the internal relay to connect to a siren, strobe light, or sub system (such as an alarm system),
using either the Normally Closed (NC) or Normally Open (NO) output. Only one of the two
connections may be used.
2. FRONT AND REAR PANELS AND REMOTE CONTROL
1
2
4
3
11
10
9
8