Staub Electronics WPS-100-DVR-8CH WIREPATH - 8 CHANNEL DVR W_500GB HDD - Manual (Page 59)

59
WPS-100-DVR-8CH Installation and Users Manual
© 2012 Wirepath Surveillance
- QCIF Fair = equivalent to a Record Quality of 1 on the Camera tab
- QCIF Normal = equivalent to a Record Quality of 4 on the Camera tab
- QCIF Fine = equivalent to a Record Quality of 6 on the Camera tab
- QCIF Super fine = equivalent to a Record Quality of 9 on the Camera tab
6.11 FACTORY DEFAULT
To reset all the DVR settings to factory default values, press ▲▼◄► on the front panel of the DVR or on the
remote control to change the highlighted option to Factory Default and then press ENTER. Alternatively use
the mouse to select Factory Default. Once selected, a confirmation dialog will be shown, press ENTER again to
make the changes. Or select ESC, or right-click the mouse to exit without resetting the DVR.
WARNING: All settings will be lost and replaced with factory default settings.
Settings cannot be recovered after a Factory Default.