ZOLL AED Pro Rev J - Manual (Page 34)

C HAPTER 2 G ETTING S TARTED
2–2 www.zoll.com 9650-0350-01 Rev. J
Installing a Battery Pack
The AED Pro unit accepts the following types of battery packs:
• Rechargeable PD 4410-series battery packs
• Disposable sealed lithium manganese dioxide battery packs
• SurePower rechargeable lithium ion battery packs
When the unit displays the message CHANGE BATTERY, immediately replace the battery with
a fully charged battery pack.
Before you begin
Be sure the unit is turned off.
Be sure the battery pack to be installed is fully charged.
WARNING! Do not use a rechargeable battery pack if the unit’s standby period will exceed 90 days.
Procedure
To install or replace a battery pack:
Step Action Notes
1 Pull the bottom edge of the battery
compartment latch outward.
When released, the latch slides upward.
2 Pull the top edge of the latch toward you
and then downward.
3 Lift the edge of the battery compartment
cover.
ZM040004A
ZM040004A