Messages in nonrescue mode – ZOLL AED Pro Rev J User Manual
Page 80
C
HAPTER
6
N
ONRESCUE
M
ODE
6–8
www.zoll.com
9650-0350-01 Rev. J
Messages in Nonrescue Mode
The unit can display the following messages when exchanging data:
Message
Description
COMMUNICATIONS
ESTABLISHED
The unit successfully contacted an external IrDA device.
DATA DOWNLOAD COMPLETE
Data transfer was successful.
DATA DOWNLOAD FAILED
Data transfer halted because the external device detected
an error or the operator canceled transmission through the
communication program.
Check the communications package or utility on the external
device for the source of the error.
NON-RESCUE MODE
The unit is operating in nonrescue mode and connected to
an external IrDA device.
USB DEVICE CONNECTED
The unit recognizes that an external USB device has been
connected.
USB DEVICE FULL
The attached USB device is full, and cannot receive data.
INSERT USB DEVICE
Prompts you to insert a USB device into the USB port
located inside the battery compartment.
NO DATA
There is no new patient data to download to the USB device.