Before you begin the maintenance tests – ZOLL Propaq MD Rev B User Manual
Page 10
C
HAPTER
1
M
AINTENANCE
T
ESTS
6
9650-0801-01 Rev. B
This chapter describes the following maintenance tests:
•
Physical Inspection of the Unit
•
Operational Tests
•
Leads Test
•
Heart Rate Display Test
•
Heart Rate Alarm Test
•
Leakage Current Test
•
Shock Test
•
Advisory Test
•
Synchronized Cardioversion Test
•
Pacer Test
•
Printer Test
•
Treatment Report Test
•
SpO
2
Monitor Test
•
EtCO
2
Calibration
•
EtCO
2
Calibration Check
•
EtCO
2
Monitor Test
•
IBP Monitor Test
•
NIBP Calibration Test
•
NIBP Leak Test
•
Deflation Test
•
Inflation Test
•
NIBP Monitor Test
•
Temperature Test
Before You Begin the Maintenance Tests
•
Assemble the tools listed in following section, “Equipment You Need to Perform the
Maintenance Tests.”
•
Keep an extra fully charged Propaq MD battery available.
•
Schedule an hour to conduct the entire maintenance test.
•
Perform the tests in the order presented.
•
Perform all the steps of each test procedure.
•
Complete all the steps of the procedure before evaluating the test results.