Progressive International Electronics C2000 - Manual (Page 21)

C2000 Program & Report
‚ 15
PIN Code Access
To access C2000 program and report features, a sequence utilizing
a valid PIN Code must first be entered.
Access is divided into two categories — manager and operator.
The manager, using a Manager PIN Code, has access to all
program and report functions. Report functions (modes 10, 11, 12)
are also available to the operator, who uses an Operator PIN Code.
Manager and operator access are described below.
Manager Access
Entry of the correct Manager PIN Code allows access to all
program and report functions. First, press <MANAGER> key.
The display will prompt you to enter your PIN Code. Enter this
PIN Code on the numeric keypad. (This number, with a
maximum of four digits, is stored in the C2000. Its purpose is
to limit access to C2000 program and report data. The number
2422 is the factory default value for the Manager PIN Code.)
Next, press the <ENTER> key. M:0 will appear in the display,
prompting you to enter the desired function mode number on
the numeric keypad. Press <ENTER> again to generate the
requested program & report function sequence. At this point, if
you wish to return to the operator mode, press the
<MANAGER> key.