Progressive International Electronics C2000 - Manual (Page 25)

C2000 Program & Report
‚ 19
the name will appear in the display.
To set the Cash PPU for a product, enter the desired PPU on the
numeric keypad and press the <CASH PAID> key.
To set the Credit PPU for a product, enter the desired PPU on
the numeric keypad and press the <CREDIT PAID> key.
As the Cash and Credit PPUs are entered, numeric key errors
may be erased by pressing the <CLEAR> key and reentering
the data. Also, Cash and Credit PPUs may be viewed by
pressing the <CASH PAID> or <CREDIT PAID> key. The
value will appear in the display.
To proceed to the next product number to be programmed,
press the <ENTER> key. Follow this procedure for each
product type at the site.
Exit Mode 2 by pressing the <MANAGER> key. The C2000
display returns to the mode entry prompt. To exit programming
mode completely and return to operator mode, press the
<MANAGER> key again.