Progressive International Electronics C2000 - Manual (Page 35)

C2000 Program & Report
‚ 29
Mode 98 — Program Manager PIN Code
(Manager only)
WARNING: Care should be observed while using this mode.
If the PIN Code is altered, be sure to make note of the new one
and save in a safe location. remember, all access to program
and report functions is accomplished via this number.
Mode 98 allows the Manager PIN Code to be viewed and
changed. The default Manager PIN Code is 2422. To enter
Mode 98, enter <98> on the numeric keypad and press
<ENTER>. The display will show the existing Manager PIN
Code. To change the code, enter the new number (up to 4
digits) on the numeric keypad and press <ENTER>. The new
Manager PIN Code will appear on the display.
To exit Mode 98, press <MANAGER>.
Mode 99 — Console Diagnostics (Manager only)
Call Progressive International Electronics at 919 821-1323 for
instructions.